Classic 60s & 70s Olds Engines and Parts - $12,345 (Silver City NM)

Classic 60s & 70s Olds Engines and Parts 1 thumbnail

QR Code Link to This Post

Hallo y'all --- I am looking for Oldsmobile folks that might need what I have or have what I need. I have some projects that are getting Olds engine swaps and a pile of parts: one is a 63 Cadillac. I'll need some parts to finish these and below is what I have to trade. Ideally I would find a good 400 425 or 455 in great running condition. I have a low mile rebuilt 403 and was going to use that but it still has 4A heads and therefor the stock low compression ratio. I have a set of #6 heads and 2 sets of #2 heads but will need work to get them on my 403. I'm hoping there is a already gone through pair of 350 heads out there. Also looking for a Edelbrock 2711 intake or even an A4. I also need an S 384395 manifold to clear my steering box. I'll need some transmission work as well if you have a shop and can trade labor for my parts.

What I have:

403 rebuilt with low miles
425 A with A heads spins freely needs rebuild
455 F with J heads frozen
330 blocks with forged cranks
350 2 with 8 heads runner but never rebuilt
394 with trans 2 bbl engine

Toronado D manifold
X manifold
A manifold
R manifold
1 3 5 8 manifolds

A5 intake
330 4 intake with 2 different early Rochester 4 BBLs
403 Q-Jet

2 heads two pairs
6 heads 1 pair

TH400 BOP short shaft needs rebuild
2004R
TH350 BOP
TH350C BOP
4L60E 4X4 CORES
Roto Hydramatic Slim Jim
4 speed Hydramatic 63 Cadillac

I have 40 years of parts accumulated for other makes and models as well. Lots to work with here so if you want to talk Olds and or trade or sell what I need to finish these cars up, let me know. Thanks, Miguel in Silver City NM

post id: 7878463375

posted: 2025-09-02 10:18

updated: 2026-01-28 14:34

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.

Classic 60s & 70s Olds Engines and Parts - auto parts - by owner -...